Concrete Cutter Tanks
Heavy-Duty Concrete Cutter Tanks
 |
|
 |
 |
If you have a truck based concrete cutter, these are the HEAVY-DUTY coolant tanks you need. Made under our roof in Painesville Twp., Ohio, skilled craftsmen hand build each tank to exacting standards. These tanks will hold and dispense your coolant water necessary to keep your blade cool and lubricated.
These tanks WONT RUST and will keep your pump and plumbing free of damaging rust and scale. With an exterior made of heavy-gauge polypropylene, these made in the USA, hand built tanks are rugged enough for the job and allow you to see the liquid level at a glance from any angle. Most concrete cutting water tanks have an internal baffle and support system (varies by size), a 2" FNPT outlet, 2" FNPT vent, and an 11" watertight screw-down cover that allows easy access for inspection, cleaning, fill, and the installation of additional fittings. You may also add additional connections using our plastic tank fittings and plastic valves. For additional cost we can weld additional fittings. We can also manufacture custom size tanks to your specifications so you get EXACTLY what you need.
Be nice to your tank: Secure and mount with suitable straps (not included). Never allow contents to freeze. Do not pressurize or subject to vacuum. Tank MUST be vented. All connections MUST have a flexible coupling from the tank fitting to isolate from vibration and stress.
These tanks WONT RUST and will keep your pump and plumbing free of damaging rust and scale. With an exterior made of heavy-gauge polypropylene, these made in the USA, hand built tanks are rugged enough for the job and allow you to see the liquid level at a glance from any angle. Most concrete cutting water tanks have an internal baffle and support system (varies by size), a 2" FNPT outlet, 2" FNPT vent, and an 11" watertight screw-down cover that allows easy access for inspection, cleaning, fill, and the installation of additional fittings. You may also add additional connections using our plastic tank fittings and plastic valves. For additional cost we can weld additional fittings. We can also manufacture custom size tanks to your specifications so you get EXACTLY what you need.
Be nice to your tank: Secure and mount with suitable straps (not included). Never allow contents to freeze. Do not pressurize or subject to vacuum. Tank MUST be vented. All connections MUST have a flexible coupling from the tank fitting to isolate from vibration and stress.
POLYPROPYLENE ENCLOSED TANK, 36" X 22" X 52" HIGH, 3/8" THICK. 160 GALLONS. MUST REMAIN VENTED. DO NOT PRESSURIZE. DO NOT ALLOW VACUUM. MOTOR FREIGHT ONLY
POLYPROPYLENE ENCLOSED TANK 36" X 22" X 52" HIGH
APPROX. 160 GALLONS. WEIGHT 120 POUNDS
2" FNPT OUTLET. 2" FNPT VENT.
MUST REMAIN VENTED. DO NOT PRESSURIZE!
MUST REMAIN VENTED. DO NOT ALLOW VACUUM!
AFTER ADDING THIS ITEM TO YOUR SHOPPING CART
YOU CAN CHOOSE A COLOR FOR THE ACCESS COVER.
SCREW-DOWN COVER ADDS AN ADDITIONAL 2" TO TANK HEIGHT.
2" FNPT OUTLET. 2" FNPT VENT.
MUST REMAIN VENTED. DO NOT PRESSURIZE!
MUST REMAIN VENTED. DO NOT ALLOW VACUUM!
AFTER ADDING THIS ITEM TO YOUR SHOPPING CART
YOU CAN CHOOSE A COLOR FOR THE ACCESS COVER.
SCREW-DOWN COVER ADDS AN ADDITIONAL 2" TO TANK HEIGHT.
|
This is a MOTOR FREIGHT ONLY item and delivery charges are NOT shown in the shopping cart .
We have certain requirements for MOTOR FREIGHT ONLY shipments, so please see our
Contact Us & FAQ page before proceeding. |
POLYPROPYLENE ENCLOSED TANK, 24" X 24" X 60" HIGH, 3/8" THICK. 130 GALLONS. MUST REMAIN VENTED. DO NOT PRESSURIZE. DO NOT ALLOW VACUUM. MOTOR FREIGHT ONLY
POLYPROPYLENE ENCLOSED TANK 24" X 24" X 60" HIGH
APPROX. 130 GALLONS. WEIGHT 110 POUNDS
2" FNPT OUTLET. 2" FNPT VENT.
MUST REMAIN VENTED. DO NOT PRESSURIZE!
MUST REMAIN VENTED. DO NOT ALLOW VACUUM!
AFTER ADDING THIS ITEM TO YOUR SHOPPING CART
YOU CAN CHOOSE A COLOR FOR THE ACCESS COVER.
SCREW-DOWN COVER ADDS AN ADDITIONAL 2" TO TANK HEIGHT.
2" FNPT OUTLET. 2" FNPT VENT.
MUST REMAIN VENTED. DO NOT PRESSURIZE!
MUST REMAIN VENTED. DO NOT ALLOW VACUUM!
AFTER ADDING THIS ITEM TO YOUR SHOPPING CART
YOU CAN CHOOSE A COLOR FOR THE ACCESS COVER.
SCREW-DOWN COVER ADDS AN ADDITIONAL 2" TO TANK HEIGHT.
|
This is a MOTOR FREIGHT ONLY item and delivery charges are NOT shown in the shopping cart .
We have certain requirements for MOTOR FREIGHT ONLY shipments, so please see our
Contact Us & FAQ page before proceeding. |
POLYPROPYLENE ENCLOSED TANK, 24" X 24" X 15" HIGH, 3/8" THICK. 33 GALLONS. MUST REMAIN VENTED. DO NOT PRESSURIZE. DO NOT ALLOW VACUUM. MOTOR FREIGHT ONLY $450.00 TE242415H
POLYPROPYLENE ENCLOSED TANK 24" X 24" X 15" HIGH
APPROX. 33 GALLONS. WEIGHT 30 POUNDS
2" FNPT OUTLET. 2" FNPT VENT.
MUST REMAIN VENTED. DO NOT PRESSURIZE!
MUST REMAIN VENTED. DO NOT ALLOW VACUUM!
AFTER ADDING THIS ITEM TO YOUR SHOPPING CART
YOU CAN CHOOSE A COLOR FOR THE ACCESS COVER.
SCREW-DOWN COVER ADDS AN ADDITIONAL 2" TO TANK HEIGHT.
2" FNPT OUTLET. 2" FNPT VENT.
MUST REMAIN VENTED. DO NOT PRESSURIZE!
MUST REMAIN VENTED. DO NOT ALLOW VACUUM!
AFTER ADDING THIS ITEM TO YOUR SHOPPING CART
YOU CAN CHOOSE A COLOR FOR THE ACCESS COVER.
SCREW-DOWN COVER ADDS AN ADDITIONAL 2" TO TANK HEIGHT.
|
This is a MOTOR FREIGHT ONLY item and delivery charges are NOT shown in the shopping cart .
We have certain requirements for MOTOR FREIGHT ONLY shipments, so please see our
Contact Us & FAQ page before proceeding. |
POLYPROPYLENE ENCLOSED TANK, 24" X 24" X 30" HIGH, 3/8" THICK. 65 GALLONS. MUST REMAIN VENTED. DO NOT PRESSURIZE. DO NOT ALLOW VACUUM. MOTOR FREIGHT ONLY $750.00 TE242430H
POLYPROPYLENE ENCLOSED TANK 24" X 24" X 30" HIGH
APPROX. 65 GALLONS. WEIGHT 55 POUNDS
2" FNPT OUTLET. 2" FNPT VENT.
MUST REMAIN VENTED. DO NOT PRESSURIZE!
MUST REMAIN VENTED. DO NOT ALLOW VACUUM!
AFTER ADDING THIS ITEM TO YOUR SHOPPING CART
YOU CAN CHOOSE A COLOR FOR THE ACCESS COVER.
SCREW-DOWN COVER ADDS AN ADDITIONAL 2" TO TANK HEIGHT.
2" FNPT OUTLET. 2" FNPT VENT.
MUST REMAIN VENTED. DO NOT PRESSURIZE!
MUST REMAIN VENTED. DO NOT ALLOW VACUUM!
AFTER ADDING THIS ITEM TO YOUR SHOPPING CART
YOU CAN CHOOSE A COLOR FOR THE ACCESS COVER.
SCREW-DOWN COVER ADDS AN ADDITIONAL 2" TO TANK HEIGHT.
|
This is a MOTOR FREIGHT ONLY item and delivery charges are NOT shown in the shopping cart .
We have certain requirements for MOTOR FREIGHT ONLY shipments, so please see our
Contact Us & FAQ page before proceeding. |
