ship | faq | info 
  *Quantity price may be shown. Click item to verify price 


Acrylic Plexiglass Mirror, Plastic Mirror, Mirrored Acrylic Sheet



Acrylic Plexiglass Mirror Sheet, 1/8" Thick, Silver
Known by trade names such as Plexiglas Mirror, Acrylite Mirror Sheet, and Lucite Mirror,
this material is great for anywhere you need silver mirrored plastic sheet. Light weight. Good impact strength. Clear.

If you need a plastic mirror that is stronger than glass this material is for you.  Our silver mirror plexiglass sheet is a great alternative
to glass mirror.  Approximately 10 times stronger than glass, you can use our mirrored acrylic for decorating, displays, projects, and anywhere you need a nice silver reflective surface.

Tolerances: Thickness +/- 10%. Length and width +/- 1/4". When we buy 48" X 72" sheets from the manufacturer, they give us a tolerance of +/- 1/4" on length and width. We also use a 3/16" thick blade to cut heavy materials, which reduces the finished size of your sheet. Sheets under 48" X 72" will likely be under, not over. 


mirror custom cut 040518

Mirror acrylic sheet has many uses:

  • Childrens play areas where a strong alternative to glass mirror is needed
  • Mirrored acrylic displays
  • Strong silver reflective  mirror walls
  • Crafts and  plexiglass mirror projects
  • Plexi mirrors for casinos and restaurants
  • Acrylic mirrored material approx. 10 times stronger than glass
  • Bathrroom mirrors in stores and gas stations to resist breakage by vandals
  • Plexiglass mirror for jails and prisons
  • Plastic mirrors for changing rooms
  • Gas and service station restroom mirrors
  • Acrylic plexiglas mirrors for boats and ships
  • Shatterproof mirrors, shatter resistant acrylic
  • Mirrors for weight rooms, health clubs, and exercise facilities that are difficult to break.  made of acrylic. mirrored plexiglass is the right choice for your shatter resistant mirror requirements.

Custom Cut Information:

We now custom cut at a small additional charge, $1.00 per piece. Here's how to get it done:

1). Choose the stock size that is larger than the size you need and enter the quantity. Click "add to cart"

2). In the text box BELOW the item on the checkout page, write the size that you would like it cut to. Specify the size in whole and fractional INCHES. Example: 23 X 16-1/4. No need to put inch marks ("). We will consider all figures to be inches-DO NOT SPECIFY IN FEET. Do not put any other information in the text box, only the size.

3). Checkout, or continue shopping. Thats it! We will custom cut it to your specified size, we keep any cutoff pieces.

Please Note:

A). We will not cut a piece into many smaller pieces, we will only reduce it to one size. We keep any cutoffs. We cannot do shapes other than a square or rectangle.

B.) Except as noted above, cutting tolerance is +/- 1/16". This means that your piece may be over or under your requested size by 1/16". Note that the initial tolerance of the piece we begin with is +/- 1/4", which may affect your requested size. As an example, say you wanted our 1/4 X 24 X 24 custom cut to 24 X 19. Since the piece we start with is already 1/4" undersize due to the initial tolerance, we are cutting from a piece that is actually 23-3/4 X 23-3/4. Therefore, the piece we send you will be actually 23-3/4 X 19. If it had to be exactly 24, you would have to order a larger size. We cannot accept returns because you failed to recognize this, so please be sure!

C). Edges are sawcut. We do not finish edges. Because of tolerance and thickness variations, do not expect all pieces to fit together properly if you are building a box, aquarium, etc. Finish sizing is up to you.

D). If you are ordering MANY of the same item and only want SOME of them custom cut, enter them separately. For example, if you want 5 pieces 24 X 24 but only need 2 of them custom cut, place '2' in the quantity box, add it to your cart, then specify the custom size. Then go back to that page and put '3' in the quantity box and add it to your cart.

E). Cutting charges will be added.